How to open your Xbox 360 and Jtag it.
In this tutorial i will help you take apart your Xbox 360 and Jtag it.
First of all make sure youre Xbox 360 is Jtagable. You can do that by going on Console settings and click on System info. Here is a picture of NON jtagable versions.
Here I will be showing you the motherboards with the exploitable kernals!
Xenon: 1888, 1902, 1903, 1920, 1921
Zephyr: 4548
Falcon/Opus: 5761, 5766, 5770
Jasper: 6750
Tools
You will need:
- A PC with an LPT port.
- A CAT5 cable.
- An LPT printer cable or male connector.
- A soldering iron.
- Reasonably good soldering skills.
- An Xbox 360 with a Xenon motherboard and a dashboard revision below the 8xxx series.
- Torx 8 and 10 screwdrivers, and optionally, a flathead screwdriver. (you can use just flat head thats what i done)
- Note this covers only the Xenon motherboard.
Taking your Xbox 360 apart
Soldering the points
Here is a picture
You will need:
- Five 100 Ohm Resistors
- Three Switching diodes (Preferably IN4148)
- 0.8 mm diameter solder (if youre unable to find then a diameter of 1 mm is suggested)
- Kynar Wire 1.5 m
- LTP Connector
Here is a tutorial on what to do.
Dumping and flashing Nand
Preperation and Flashing
Thats it you are done and your Jtag is now ready to use.
If in anyway you have damaged your 360 i take no responsabilieties. This is a only a guide to help you.
Note: The youtube videos are not mine all credit goes to the person that made it.
Please thank the topic on the way out if this helped.
If you have any questions about this Pm me Or add me on aim jhon brukes
Hopefully this becomes a
In this tutorial i will help you take apart your Xbox 360 and Jtag it.
First of all make sure youre Xbox 360 is Jtagable. You can do that by going on Console settings and click on System info. Here is a picture of NON jtagable versions.
Here I will be showing you the motherboards with the exploitable kernals!
Xenon: 1888, 1902, 1903, 1920, 1921
Zephyr: 4548
Falcon/Opus: 5761, 5766, 5770
Jasper: 6750
Tools
You will need:
- A PC with an LPT port.
- A CAT5 cable.
- An LPT printer cable or male connector.
- A soldering iron.
- Reasonably good soldering skills.
- An Xbox 360 with a Xenon motherboard and a dashboard revision below the 8xxx series.
- Torx 8 and 10 screwdrivers, and optionally, a flathead screwdriver. (you can use just flat head thats what i done)
- Note this covers only the Xenon motherboard.
Taking your Xbox 360 apart
Soldering the points
Here is a picture
You will need:
- Five 100 Ohm Resistors
- Three Switching diodes (Preferably IN4148)
- 0.8 mm diameter solder (if youre unable to find then a diameter of 1 mm is suggested)
- Kynar Wire 1.5 m
- LTP Connector
Here is a tutorial on what to do.
Dumping and flashing Nand
Preperation and Flashing
Thats it you are done and your Jtag is now ready to use.
If in anyway you have damaged your 360 i take no responsabilieties. This is a only a guide to help you.
Note: The youtube videos are not mine all credit goes to the person that made it.
Please thank the topic on the way out if this helped.
If you have any questions about this Pm me Or add me on aim jhon brukes
Hopefully this becomes a
15/10/14, 08:54 pm by keury_nunez
» KILLSHOT707 LOBBIES
31/08/13, 03:39 pm by jmodzz*
» PS3 Cod4 Mod Menu
23/07/13, 11:59 am by allensrock
» Docter Gaming Modded Lobby Prices
04/04/13, 12:17 pm by Anox Nino
» I host cod4 lobbies
20/03/13, 07:25 pm by Evomodding
» I WANT 10th!!!!!!
07/02/13, 01:51 pm by jackinnes99
» MW2 and Black ops prestige Lobbies
13/01/13, 04:04 pm by jamesb12345
» inv me 2 modded lobby
05/12/12, 12:53 pm by thomas.elkins@live.co.uk
» modding waw
23/10/12, 08:41 pm by vulcan